BlueScope NECTERE GOLDLINK™ and LYSAGHT TRIMDEK® were applied as walling systems, which is featured by evenly positioned extruding decorative columns that were made from pre-curved GOLDLINK™ panel, keeping the whole walling system in a smooth and artistic surface. The totally area is 25,000 square meters, and the height of main power hall is about 30 meters, and 39 meters of turbine; the maximum space between structural columns is 12 meters
An extruding horizontal beam is on top of decorative columns, giving the building a unique and innovative looking
The decorative columns and extruding beam use BlueScope improved Clean COLORBOND® steel Majestic Grey with XPD coating, and contrasting features used BlueScope improved Clean COLORBOND® steel Coral White with XPD coating
LYSAGHT® Solution
The stainless steel internal box gutter on top of the horizontal beam prevents stagnant water
Although the decorative columns are evenly positioned, the inner structural columns are not, therefore the decorative columns can’t be structurally supported internally. After optimizing the design by the Lysaght technical support team, LYSAGHT® C section purlin and girt system were used to support the decorative columns panel, solving the technical problem of the design
The walling systems were all horizontally installed, and the inner girt design was modified to utilize same sections to optimize sectional properties. This enabled significant saving in the installation cost of the walling sub sturcure
